Thread: Overclocking E8400

Hi I am new to this and I like the oc E8400 to put my 3600, my motherboard is GA-EX38-DS5, 4x1gb GEIL Black Dragon 4-4-4-12 DDR2 800, I have seen some of this forum has already since 3600 without problems, I could say about the voltages I had to have a reference, and if anything has touched most of the bios?, thank you very much.

3600 MHz nothing special, just down the divider 667 to the memories that eventually you are in between 800 and 900 when uploading the FSB to 400, regarding the voltage should not touch anything

Greetings

Put the memories with a 1:1 divider 2.00D is not putting anything? Or upload voltages of ram? Or heart?
Thanks.

Nothing at all, these memos should give more 4-4-4-12 @ 850MHz with the voltage of manufactures (which should be 2.1vo 2.2v, know it), but gives you, relax latencies to 5-4 -4-12 and ready, and handle more when you put the item to look for ways to squeeze more

Greetings

Come to v 1.8 but you can put up to 2.1v, I change the timings?I have the ram to 1:1 2.00D 800 to 400 fsb I have uploaded the voltage to 2.1 V, I put the Vcore to 1.23 v a little more variety when you start windows and the 20s crash, after I uploaded the Vcore to 1.32 v and seems more enduring, as it is possible to have both Vcore if I overclock a 3600 to fuck? My CPU waterfall with the voltage range of would have no claim? Or the rams waterfalls, not understand.

I put fsb voltage to +0.025 and 1.26 Vcore I started windows and it has started well, I've passed the test and was Intel burn CPU is fine but I have a 72 º C and I've restarted, can happen? I have a NH-U12F with 12cm fan and has not warmed much understand.

If you got the heat sink well built and cholera in the same? Another truth is that you test kills micro!!... I think that with the reach and prime95 eye, do not say that is bad, but I see too exaggerated (in my view)

Greetings!

To check if my CPU or ram as touched or come check overclock factory?

I checked the ram 800 stocks and run fine, now look at the CPU.

If you're new start listening and learning, when you know more and do it yourself if Sacal 4 GHz for now do not you risk processes not understand or are not used, first learn to read and then to write.