Thread: Basic overclocking guide

A small guide to the basic half Overclock Poor, I hope we go through here first before asking things go so simple!

The idea is to keep up while the new user to see when entering the site and many read them slack post-it.

Trying to analyze of times things that are modified to avoid leaving the guide. I am the most KLARO and that's why I say if you did this or can improve photos CPU BEFORE 133 MHZ.

Its just something you go looking for the point where the computer can go stable.

The guide is not lost because a user sent me a PM asking for overclock.

In some cases the procedure to reset the bios is not that.... always good to read the manual of each plate there are explained in ways appropriate to reset each model. The guide is super good!

Hi

CMOS bios are the first OS that pc which is to analyze the parts that bring your pc and manages these is also responsible for starting the operating system.

To reset the parameters of the BIOS if you overclock the crap and let the PC do not pledge.

There is no way to do this before making an Overclock.

Nose on pc have no problem with overlock or anything, but I'm going to buy a notebook and I would ask whether it is advisable to give oc or not?, I find not that they do not have good ventilation, so really, it could done to give oc…

It's a basic guide as the names of the topic, but for the other guides are in the collection.

To my knowledge the notebook can not be done if you overclock and do something successful. "I do not recommend it for high T º compared to those who have a computer.

Boards are rather limited as to what is Overclock, most of these settings are not voltages, this is because their use is rather like the office PC CHIPS, but to adjust the FSB, the frequency of reports and the CAS latency. In addition to the BIOS of the notebook has no option of changing frequencies, latencies, etc...

I think they've changed that, obviously, had in mind the point of the battery, but then you better not do anything, becoming a question of the battery types that there is some better length?

Thanks!

I learned very good guide.

How is the theme of the reports or overclocked ... lower the frequency of ... any guide? If it is not much bothered.

I think it is always best to read the manufacturer's manual before embarking on OC, and if you have basic knowledge of configuration and installation it is preferable to abstain unless you about money, I got one of my PCs is an Athlon x2 4800 from 2.6 to 2.8 with the stock cooler is fine and very hot and not completely stable, in another pc an AMD Athlon 6400 BE at 3.5 and got everything right, and I use to play a 3.0 Phenom 9950 and am still trying to up to 3.0 but I have with the cooler air that I do not dare to put more to that cool.