Thread: I have some doubts to overclock

I have the e2180... 2 GB DDR2 Kingston value ram ... nothing high-end (high performance) a novice so do not know anything about overclock ... but the bios and therefore has to raise the bus sped on my case .. Default is 200... Example is increased to 205 ... and up to 2050... And the dram bus climbs to 674 - and 667 is typically...
I have to lower the frequency of ram? Or not like? I read where the case was another mother but same processor DDR2 frequency 800 and told to get off the 667... When boarding the bus... automatically rises the ram of the ......


I certainly understand if they try to explain? As well as that it's time to raise voltage? But not force the processor or anything.... even a slight ... but no need to raise voltages or anything like that to go with me to settle or a 2.4 GHz but not force anything then BROUGHT unstable or not ....

Thanks.

This is all your work, sure that the CPU reaches 250MHz (2.5GHz) without the need to raise the voltage, but we got to know you by seeing if the pc is stable. You realize you need more voltage because the cpu does not want to upload more but the mother does not turn on. If your memories are 667, you should go down to 533, so for example (by rule 3) in the 250 got in 667, 225 and 600. Always watch your temperatures, and test the stability of the computer running a program, the orthos is very good.

Read more, so you are left with no doubt, because all this info in this guide.

First up the fsb to around 230, if the process holds 5 till 5 in the 250, even if holds up to 1 in 1 start windows exceeds that means, then you will flashing the bios, using the stack about 5 seconds and giving back, and put the fsb at about 5 points below the last frequency functions, and will be safe to run windows with some stability, and then measuring temperatures no sure way too about 15 degrees as I understand it this is measured with programs, is the only portable everest ultimate edition, there are others, but I can not remember names. This ensures you oc easier and no need to change frequencies or ram voltage variations, thus increasing the performance of my processor at 25%, so you can leave a 2.00GHz @ 2.50GHz, function

Greetings.