My first overclock

**Garry Sobers** · 05-15-2009, 11:13 AM

Hi, I present my first overclock, is no other world but just overclock it. Temperatures were taken after I was playing from 10:30 PM until 01:30 AM COD4

I did something cool and pure fans have stock. These parameters did.

HTT = 224x4

Vcore = 1.4V

VRAM = 2.0V

Like cool 2.5GHz to 2.8GHz upgrade.

**Cade Hugue** · 05-15-2009, 11:14 AM

Hello, I can maintain that q oc with stock Vcore, do not think is necessary or required to upload it...?

Is for example I have my x2 4000 + from 2.1 to 2.9 GHz with stock voltage, even a little less, it's the memories 1.325vy v 1.8 (stock) and walk to 972 MHz value!

Greetings

**Garry Sobers** · 05-15-2009, 11:15 AM

Hi

I will take in your parameters, then we will test if pulled over this process, you have all this fan stock? I have the stock fan only, why not put hand over the matter.

Greetings.

**Aubrey854** · 05-15-2009, 11:16 AM

Hi, the pc is in my profile, and I have the stock cooler.

What I did was take the top side for better ventilation; I was measuring and 2 orthos stability testing for a while and if everything was well put the lid.

Greetings.

**Armando489** · 05-15-2009, 11:17 AM

Where to upload it all in stock and is stable; I have a Dual core E2180 2.0 GHz 2.8 with stock Vcore, stock Cooler VRAM stock, so if you've always used the PC without flip side (I have since my first pc ..) and temperatures Oc lower than a full 55 º for 5 hours, I hope to help get him out and the juice in this process.

Greetings

**Anton985** · 05-15-2009, 11:18 AM

Hi

Sets in a multi HT 4x and voltage to stabilize and upload the rest, the others could get to 3GHz

Greetings.

**andy852** · 05-15-2009, 11:19 AM

Hi

I go by the most conservative, rising only as far as FSB is stable.

Greetings

**carian789** · 05-15-2009, 11:20 AM

Hello, I have come to 3GHz, but not stable, and to download 5-5-5-18 left in me and I fuck with the same configuration but I have no dramas, but my motherboard will not let me touch almost memos, the other is to raise the voltage to 2,1 v but do not want, or have them run at 1GHz, but I destabilizing with stock voltage, no good can we get these reports.

Greetings!