Thread: Overclock PC chip

Hi, I'm new at this from the overclock, my name Dago.

Well I had never gotten into this because I was afraid and had no resources. But I try to do something to my pc, features:

P4 1.6 Willamette
Plate Pc chip M925
Kingston Memory PC100 2x128
Video Ati Asus Radeon 9200 128M
Maxtor 120Gb Hard Drive 7200rpm

I'm new at this and read the tutorials but hopefully if a cache can help me would be best man, here a screen of CPU. And if you can not, I have 40 Lukas to invest in something that you recommend?

Hello, hopefully a good time and certainly any questions; on your investment if you invest 40 Lukas able to oc, I do not think is the best option because it will not benefit much to accomplish.

Ideally it should stay like this together and silver for more time until you can build something better and really serve to reverse.

That would be a good investment? I would have to buy: D I need the money and spend it; finally buying a board that can not use but do not have to spend money. And with this I can not do anything?

This board supports DDR memory, at least recommend that you buy this memory and will remove you. Who is coming and put DDR memory, you must change several jumpers on the board, the manual goes, and it’s a long run and a jumper’s voltage. With that notice an increase in performance and this memory will serve to update you after the rest of your PC.

Check that the reports that these plates have many variants.

Good idea, to invest in better ram memory, at least 512 mb, so if you're looking for before you go to as DDR.

Besides selling your other memos and you are left with a surplus of silver.

Hi

A reports already thought but ... is what comes from the 775 sockets and DDR2 memory then ... can be a bad investment, I think, grated potato or toy?

Recently a discussion about that I had the same board and not passage no longer work well use DDR PC2100 are you better buy an p4i45gv few MEMOR new Solar energy and so can you overclock a little 1.6 @ 1.9 but does not give you to increase the voltage of prose that I hope helps you!

I do not think you can burn, because I have the same board and I PC chip change, looking at all the jumpers on board, and why that are run over an extra voltage, since the DDR and SDR operating at different voltage. Although the board holds PC2100, and PC2700 I got no problem, obviously being used as PC2100 because no overclock options, but I think buy PC3200 smoothly. The change in speed is remarkable. And as a comment not because someone is burned, you're going to burn you, so if anyone would overclock, because the world has been burned parts and is still practiced ... "Anyone who does not risk does not cross the river”.

Sorry for the delay, but I did san Google to find this forum until now, my case is the following I have an ECS Motherboard M920LR and I want to know if there is any way to update the bios to be able to boot from a USB memory and also I have problem with a video card ATI Radeon 9200 128RAM allegedly AGP4x and supports AGP8X, and simply does not display video.

If you have a comment, suggestion, hint or indication as to achieve this, I am grateful in advance for your attention, thank you.

As I do not want to spoil the bios that I know how to support it and to reload in case of problems.