Thread: I can do with this overclock

Hello

Informatics study but not yet much of frequencies and latencies and weird stuff is a p4 2.8 (before it was over a 3.0) 384 of ram (2 modules) video asus Radeon 9250.

My wave board supports the memos overclocked up to 400MHz.

Thanks

Hi

I am of the same process as much as 2.8 GHz to 3.4 GHz out as were in any case you are limiting yourself to your memos with a PC 3200 to be oc a more or less important ESOP hopes have helped.

Hello

But my overclockers to the plate 333 or 400MHz... Even modify latencies... we want you to guide me please.

Thanks

Hi

I see the images well; no praise can go up in size?

Leave latencies as high as possible and thus discard this constraint.

Hi

Your memos are you limited as the maximum frequency of one of your memos is 133Mhz, so you can not climb over it, the other holds memo to 166Mhz. And if you get the memo max. 133 MHz that would achieve the OC no point ...

Although it might make an OC.

Hello

That leaves the 166 in memory 133 and latencies up everything I can, that is free for the CPU oc.

Then it is true, he touched turn to vga.

Not enough, the memories are equal, not every one can work at your speed, so are the 2 in 133, so I say let in the 133, because if one gives you and the other did not OC. Besides the reports of rising linearly with the processor.

I do not like the source you got; 11.6v is very low, almost dangerous, although it may be the sensor, the 1100 and mine says is a lie.

Try to leave... but when I play lineage and would not survive a critical q pulls me close the game, it is memory that TICE error generated if they lower the latencies to 2.0 and go without problem.

I have an extractor in the chassis through the rear and a front fan ... he also put a fan on the graphics (it is very hot).