Thread: Overclocking 8600GT

Well just wanted to show that the OC and with which I am very under...

The flashier not to be used every time you install Windows Atitool or rivatunner

The original clock was:

GPU: 600MHz
MEMORY: 1008X2 = 2016 MHZ
Shaders: 1452 MHz
Bandwidth 31.8 GB / s

And so now let Artifacts and without stable and I did a test with Atitool 30 minutes and remained without artifacts, also try playing with some options high...

Hello

That depends on each game, in my case for example in Half-Life 2, which gives 100 fps up to 130.

I believe the assassin was 18 to a full 20 fps, 30 fps now leads in win xp then try to install the light and gives me 33 to 35 fps in 10 mode good I keep hearing and output gain of 15 to 20 fps relatively ... What were the most Shaders ... I can not demand more because my processor is not dual-core ...

Hi

Try raising the voltage without increasing frequency, so know your limits, that should pass the vga 700MHz GPU and memory should provide something more than that.

Passes the 700 MHz but begins with Artifacts, probe as much as I could get without artifacts and becomes.

It was not much but with this latest modification improves 2fps.

In which can go further with OC but to enter the voltage change...

Greetings

Test shaders leaving in 1700 (as between 1700 and 1750 that limit the shaders) and then starts to rise in the core individually, most often what they really are limiting the overclock shaders, not the end of the core frequency.

Greetings