Thread: My new project OC

Well, first of all, sorry to go away a season, but I had a lot of work, and well, now I have some more free time ...

I have a project in mind, something expensive, if the truth ... but ... The final is expected succulent. Is called... OC 4x4 Project.

Quad core Q6600@2.4Ghz
Power Supply 1000W
2x 1GB RAM (2x512MB have separate, but they will take 2 ...)
up here is what we have ...

My future acquisitions.
Motherboard ... with 4PCI-e
3x NVIDIA GForce 8800GTS 320MB (I already have 1)
+2 X1GB of ram.

I have an 8800gts in 320MB and mounted on the computer.

You know where to go and the shots?

2.4 GHz Q6600 @ 4 GHz
4 GB RAM.
4x XFX NVIDIA Geforce 8800GTS 320MB.

That you think the project?
Be a succulent machine games ... and 3dmark... very high values will give me. (Or so we hope)

Now I'm looking for motherboards with 4PCI-e @ NVIDIA chip and 16x (for SLI), what I recommend? Hereinafter known as the HW and Overclock ... I'm asking for help!

Well, you go as you continue to evolve ... I have in mind to buy a bigger box ... miss her, but I was running out of short ...
the issue of 4Gb of RAM ... I am not very clear yet, since it only runs and 3Gb ...

I see that hard ... that refrigeration? 4 modules of 1 GB each? if you can compare 2x2gb, was seeing some spectacular a stunning price, which hurts not know anyone who can bring me ... if you can walk by them ... to raise both fsb, the memos, but are not synchronous, they will be more than 1000Mhz, compare So some pc8000... because 8800gts? 2x8800gt and you might have to be incredible ... nose, are ideas that crossed my mind, I'm collecting money for memos and video, to follow the oc on my 8400, my memos 800MHz, 900MHz and are in no way to download them to follow up the process ...

I think we also face a problem when wanting to do a Triple SLI, as the line for 8800 is only available in the GTX and Ultra (the one available BIOS and dual SLI connector that brings the cards) for the GT and GTS only is simple to do SLI with 2 cards also supported the motion with the simple 2 x SLI 8800GT and 8800GTS or 2 x 2 x 2GB PC8000 so that you do not bottleneck with the increase of the FSB (Buy 4 memory modules you may overclocked to conflict)

Greetings

OK, then change it ...
Q6600 @ 4Ghz.
2x2Gb DDR2 800Mhz
2x9800 GX2 or 2x8800GTS ... (and see you, obviously, if I 2 8800, I just bought a ...

Let's see if I have time tomorrow, and I put up a sack FSB .. download the reports ... and good luck with everything ... 3GHz to try first, just down the memos ... to see how stable it is ...

Hi

4 GHz? I do not get me ... that have refrigeration?

1x9800gx2 is better than 2x8800gts or not?

Yes, but the idea that it's 4x4.

We will see if the CPU is banking rising voltage, however, to reach 4 GHz.

Hello

Clearly, I have water cooling ...

A modification of the Thermal take Big Water SE 12cm Liquid Cooling System.

I did up the fsb, htt or in this case from 200 to 225 MHz, the multiplier in the maximum 13.5 allows the mother to me, getting a final frequency of 3037.5 MHz, the original 2700. The problem this brings is that he went to Link Ht 1124.3 MHz, and I understand that this value should never exceed 1000 MHz, and the memo went to a little over 800 MHz to 867 MHz to be exact. Realize the stability test with me and ORTHOS error in the draft memo, the system is unstable. I understand that this drawback is solved by lowering the Link Ht in less than 5 which is the default value, but the mother did not give me that option, I can only handle voltages, and the htt multiplier.

Hey guys, I disappoint them, but the project fell apart ... I had to sell the PC, so the most that can now overclocked Asus G1S and I will not do....

Greetings, and sorry!