Thread: E8400 overclock help

Hello I wanted to do overclock my e8400 processor with motherboard byte ex38-dq8, 4gb ram corsair Dominator 1066MHz to me which I recognized only 2.7 and not 3.5 with my windows xp 32bit and NVIDIA 9800gx2. Me a little by the BIOS is not much of that, I would like to put a 4.33ghz or 4.50ghz with your help, and q have to say a thermal right 120 extreme. clarify that is 24 / 7 and not what the cpu-z, gpu-z on the speed fan, the orthos and core temp programs I needed to make oc.

I hope your support and thank you very much.

24 / 7 is 24 hours 7 days a week, refer to the highest stable oc. Simply go to bios, to find where the fsb of the processor, and uploading to go little by little, I think I read it, but you also know combine latencies, in order to relax the memory so you do not generate instability. Always check the temperature. This is all at your own risk. 9800gx2 or for use in download rivatunner and do it from there.

Is the normal graph I get to be playing 80grados, indeed with rivatunner can not raise the fan speed of graphics.

Take a look at what made:

Graphic booster
--- 9x CPU clock ratio
--- Frequency CPU 4.33ghz (482x9)
Host CPU frequency --- 482
PCI Express frequency --- 102
--- CIA2 disable
--- System multiple memory 2.00b
Memory frequency --- 800 964
Dram timing selectable manual ---
Dram RAS to CAS delay 5 5 ---
DDR2 Over voltage control over --- 0.40
Cpu voltage control 153750v ---

The more options in this part of the bios or are in the car and part of the bios is called advanced bios features I have just enable the option called q Cpu Thermal Monitor 2 (TM2)

The fact is that with this configuration, I open windows no problem but when the step ACTC I restarted the test alone, it can be? As is already as high over voltage the CPU?

Not much Let the first set and tries to climb well. To upload reports latencies at top, so you do not generate instability.

It is something that high temperature in the video board, but considers that it has 2 gpu inside. The fan should be able to regulate it since.

Another thing, trying to block the frequency of the ICC, it is not certain to increase.

Not much of 153750v over voltage, if so, to what is the maximum me raise recommend? In BIOS option that can climb to the top of the ram latencies how block the frequency of the ICC and it is not safe increase?