Geforce 6200 review

**Domenic Smith** · 05-20-2009, 10:10 AM

Geforce I have a 6200 card 64 bit 256 mb ddr 2 (I)

One of my questions is as follows.... T ° is the cause that is working normally without overclock. The other is if you can do to overclocking. And whether it can be overclocked ... You can as well as the heat sink that comes with ... overclocked to maximum ... only a 10 or 15%

**Peter dmello** · 05-20-2009, 10:11 AM

The plate is DDR1, and the heat sink using EVGA video cards for their low is not good to say ... You can do oc, but the only possible way is to flash the bios with a new one with the overclocked settings, because the plate is blocked to oc from windows. Surely you can get a 10-15, I reached to get a 20 without problems but adding a fan Pentium1 one, which under the temperature 15 º, find out if you have something lying around that can put in that sink.

**Jim Crow** · 05-20-2009, 10:12 AM

Hi

Not often used DDR2 400MHz memory and the link says they are DDR, confirm that the plate is identical.

**Domenic Smith** · 05-20-2009, 10:13 AM

Hi

If it is the same that comes on the link ... I give you only the information that I delivered or rivatunner everest Atitool and me and all say they are DDR2...

**Jimmy Mosquito** · 05-20-2009, 10:14 AM

Well that just changes the speed of the memories.

Guide 6200 @ 6600, then explain how to flash bios, and may hopefully have a 6600 in your hands.

**Ross Tyler** · 05-20-2009, 10:15 AM

A better change your card to pay money to be spent in this country that the card I sell and buy together more and another good, such that card did not run NFS MW at the maximum, a disaster that makes the 6200 as a bad card, well that's the Turbo Cache but I am wrong. These reports are also 64 bits, well this regards.

**Charley Dumas** · 05-20-2009, 10:16 AM

Are blocked, just upload the reports and the core is labeled about 5 minutes.

Only serves the flasher.

**Johnson Twopenny** · 05-20-2009, 10:17 AM

However that good vga before flashing should put dissipation, that no fan and also brings the memories might be burning, with that eye, which was read the guide flasher.

Greetings

**Roger Cole** · 05-20-2009, 10:17 AM

Hello

Much can not be lifted; the mine went from 533 to 620, for flashes.

**Domenic Smith** · 05-20-2009, 10:19 AM

Well what happened at this time ... mm well you did overclock the card a 10 to 15% and traveled quite well, I did not get much cooler as it is and nothing more ... but then I worry about my ocear Intel e2140 is coming ... and as I have very good motherboard and memos ... OCEA but even more so I could ... I was spawning season games but not have to overclock because somebody knows this problem occurs?

My motherboard and my memos are 533 MHz and the motherboard is a P4M800 Pro-M7 8.0vy Well it went up the clock the cpu to the max of 265 MHz, also reports a 266 MHz setting latencies I got the procedure and 2.1 GHz and stick with the fsb of the motherboard of 1066 MHz which is the maximum that holds the board ... but not that I started the game spawning.

**Johnny Cuzens** · 05-20-2009, 10:20 AM

Hello

It is certainly volatile, try lowering the CPU a bit and try again.

**Domenic Smith** · 05-20-2009, 10:22 AM

Hi

I think if your memories of working at the maximum MHz fsb and the plate at the maximum also supports ... there will be no consequences for the future?