Thread: Overclocking a Pentium D 805

Enabling Dual Channel makes its reports go from 64 to 128bit bus, or in the abstract double the performance.

The reports say that are working to lower latencies, so you add a single serve to enable dual channel. s

Compare only won by the side of speed memories.

So you do not increase directly affects MHz processor but to help you get a more stable overclock done. Or toy that is pure speaking w ** s. but this is more less what I understand.

If memories are expensive, they work with tighter latencies which mean they are excellent a common latency. 2 memos have the same performance improvement but do not affect the ability of c, we determine the brand.

I remember once by "accident" raised the fsb from 805 to 200 (it was before knowing what was oc), and obviously I am not pc thought is burning! And recently there I remembered that my father told me, if you ever fuck a pc much, can always clear the shock that hit me this time.

If down the MHz of the ram as you run or not?

I gave it another fellow fan and I more airflow to read here on the forum (for the bad wave that never helped me believe that no one reads and just ask) and go in the 30 º C and the split hurry to get 40 º C with the obvious test of stability is sent to 50 º C but not at 60 º C. As I now will last if the processor is held constant at this speed?

Games, listen to Internet music, but all along?

Thanks to all this is only the person who helped me in my overclock obviously k GoldenX others think or bother to help (as to continue using the forum)

With the voltage you have the procedure I think that will last a lot, and the temperatures are fine if your memories the NPV is still 300 MHz 33 MHz you can climb to leave the frequency to which they were made and then even more as the memories hold a 10% less than what the manufacturer. If you think you should raise the voltage if you are unstable, but have an incredible luck.

I clearly understand what you mean, but really I think if I had enough to last 3.0 GHz to want more, if that speed can make me run any program you want to buy just need a good video card and ram and were spectacular, now had the advantage of ventilation following a low power source + a fan of cold air on fan processes in the drawer lateral is a fan pulling cool air from front to back, temperatures were before measurements.

Now next step, addressing many as 12 had fewer open windows and gave me and put the blue screen, or when the memory dump and restart, I thought that problem could be that the temperature had already made the test for stability and zero problems, so I decided to change the fan who was behind putting forward to this side of the fan through the side of the drawer, which I meant an increase in temperature and sound horrible, now go as normal in 35 to 37 º C with the previous form when he was in the 30 to 34 º C and occupied Concho increases precipitously to 50-51 º C

I leave as to have a better ventilation? Or as I put the fans to be cool or the process.

Thanks to this answer.