Thread: Sempron Overclocking

Hello everybody!

Recently I have a Sempron 2600 + with the MSI board K8MM3-V OC and I love him but bios not find an option to raise either the FSB or the multiplier.

So I raised the FSB 200 to 212 and I run in 1696 MHZ. but if I try to upload it to me 1750 hits, or if I try to put the FSB at 218 or more.

Know that this happens? And how can I get more OC?

Help for families!

Thanks.

Greetings!

Hi

Not raise the Vcore? ^ ^ and lowering the frequency of memos! Because that is creating a dump you.

Greetings.

Hello

Do not know if he can raise the multiplier by software?

And some programs to raise the Vcore?

Hi

The multiplier is a serious upload process if you have it unlocked; the Sempron is not only the AMD Athlon FX, and the old mobile.

Mother in that you limit the chipset is one way much more than that you will not achieve more voltages or relaxing the ram.

Hi

It is difficult to Oc in that plate because it is integrated and has no BIOS option to increase the HTT of the process.

You can climb but remember this board does not block or PCI or AGP.

I could give more to the OC process and reach the 2000 MHz but the time is reset and the worst damage is to win xp and I had to reformat. But the good thing about that is that then it stops at 1800 MHz and the memory frequency to 220. With 2.5 3 3 6 and walk or stable.

Oh, and the HT is at 900 MHZ. will be much?

Friend that I also have a board + Sempron 3000 + and the truth do not let this OC by the bios, I uploaded the Clocker But everything went well then I went up to 2000mhz and my pc shuts down the minute I did it mean to go up as each component separately.

Thanks

Hello

Stable while there is no comparable problem, if you do you may have a flasher overclock options, you flash the bios, if not unique is that you can help a bios, but risky, because there is not certified or anything.