These parts all you have to do is upload the multi, raise a little voltage and process memos and lower latencies; you do not have to climb fsb.

Now if you want to achieve even better performance all the guides you can, and familiarize yourself with the bios once you integrate the world of oc can help you more easily.

I hope that very well, you know... raised the multiplier (I upload up to 25) and told me to be started overclocker failed, re-setting, it rose to 14, and I increased from 2.6 to 2.71, then change the htt to 236 * 14 but I began to plate, that was it I have placed a few volts, is there any way to calculate the volt for that I must put overclocker (14 * 236).

First thing that you have refrigeration, we recommend putting a cooler inside before chipping. Otherwise, give me the exact model of your memos pa help with latencies. I am coming to that country 24 / 7 would prove multi v 1.45 with 14 memos with 15 multi or divider 667 to divider 800 and begin to climb. But before that you need to know that memos often you can leave it running and voltage. Also the type of beep it gives you your plate, because if one is memos.