Thread: Asus M2N-SLI deluxe overclocking

Anyone has the board ASUS M2N-SLI Deluxe? I Overclocked my 4600 + and my 6400memo 800MHz 4-4-4-12 and have had some problems ... mainly in the bios settings.

Happy to be in overclocking ... I thought there were going to kick in here, if I move the admin theme I happy. I give you my hardware:

Processor: AMD Athlon 64 X2 4600 + 2.4 GHz
Board: MSI M2N-SLI Deluxe 570
Memories: 2Gb PC-6400 Patriot Extreme Performance 800MHz 4-4-4-12 (4 modules of 512). Video: MSI 8800 GTS 320 mb
Disk: Seagate 320 GB Sata II

Such comparisons, because as you see this missing Vcore ... I arrived at 2.65 GHz with 1.45v stable ... a lower Vcore I throw errors.

Otherwise, your memos should be fine at that speed (880)... I do not think the problem is there. In any case, upload a bit (2.25v should suffice).

Do I make you my settings here:
HTT: 280 MHz
Multiplier: 10x
Link HT: 4x

From what I read about these reports could leave their latencies in 3-3-3-8-2T.

But something very important to mention is ma step dissipation ... advise you not to over 2.5GHz with the stock heat sink; it would be better to get a better to make sure no problems arise in temperature.

I saw that already have a big typhoon... be well to have confidence and pleasure OCEA.

I in 2880 MHz (240mhz) with a Vcore of 1.45v, memory 800 MHz 4-4-4-12 ... the only thing unusual is that the settings in the bios to 1.45vy Asus PC Probe II shows me a Vcore of 1.54-1.56 ... then I do not dare to rise further, by about 1.5-1.6 gets hairy thing and one could burn the CPU ... that is so true I have no idea. At least cpu-z shows me 1.36vy the speed fan shows 1.38v.

Do not worry about the Vcore, each program provide values at will (I trust that I said the same bios) ... and since I have the Vcore to 1.5625v, and while I have no risk dissipation.

With regard to your overclock, I recommend downloading the multiplier to 10x and micro upload at 300 (where you say you boot to 3GHz) and to generate higher returns.