Thread: Sempron 2600 + overclocking

I have a socket A processor something (true to 462)

Sempron 2600 +
MBoard abit NF7
1 GB ram DDR400 (512 buffalo and 512 corsair)
Cabinet cooler master centurion 5

Help if you have any manual data it is better to increase the FBS.

I had something else besides an Athlon xp 2200 t-bred that the FBS top 200 * 11 to 13 but runs well, and change it to a Sempron 2600 + which I can not upload more but is 185 * 13 is faster. separate review Athlon xp everest with and emulating an Athlon xp2600 + q and the data 'in a little shop, looked faster on the Athlon XP Sempron sensorially but was the fastest Sempron, another question because when I recently put the processor to start the pc before entering bios me running 1100mhz and DDRAM 400MHz (I have an Abit NF7) entered the bios and change the FBS to 185 * 13 and restart your PC and me 2040mhz sale (something like that, but not 2405) and DDRAM 370, this means, means that the ram is working at 370mhz and not 400.

185 * 13 ... they are indeed 2405 clearly you are not fishing the right frequency ... You may be setting the process to 185 by 2035 and 11 gives you more one decimal is rounded to 2040.

Your memories are actually working at 370 ... whether they are working at the FSB DDR400 * 2 and no way to fix 400 without the FSB is 200 (in a manner which is not to the detriment of performance) of course ... those numbers are the latencies you the manufacturer to ensure a certain frequency, which the manufacturer ensures that you walk right ...

SPD or the information from memory, the system informs the user and how often and what latencies they ensure that the reports will go well ensures that your memory will go well with such latencies 200, 133 such latencies, etc ... corsair not say that nothing means that the manufacturer does not guarantee an optimal performance at a frequency or latencies than 200 ... but does not necessarily mean they can not function well.

Unfortunately the release of the Sempron Socket A for Athlon become mobile and thus unlock the multiplier, you can not do with places N-force chipset.... but what good is the model 2600 + has a good multiplier Overclocked, have no problems with that.

I was unclear what the specific model of your plate.I had an nf7s2 abit and also is the famous nf7S abit rev 2.0, but you had not heard or dogfight.... Sure that is the exact model you have?

Patch 1.0 and 1.1 as well ... but it would be better if you look at the model well ... It is therefore essential in these plates, with the confusion between models with names like the festival was corrupted by the bios with the bios flashes a wrong model ...

Yes, it is better to raise the fsb ... but having a multi low can lead to a low ceiling oc ... a lot depends on the fsb to the plate and gives you what you endure the memories.

Bench is short benchmark, which is a program that gives you a score to compare between both pcs and gain performance of your pc as you Overclocked.

Vga to what are the most tested 3dmark, processor, PCMark and others to Sandra and everest reports but are not very reliable or accurate, hard drives, etc…