Thread: Overclocking help

An Athlon xp 2200 + thoroughbred when changing the fsb or multiplier reboot and does not raise more. I have to apply clear leaving again. if you move in a MHz fsb happens with the gearbox and the draft 13.5xa 14.0xy no longer part and that is no OC. I have a Thermal take heat sink with a vent cooler master arrives and paste artic silver .... The temp hits 40 when in Windows when a game goes up.

This rare, but gives evidence of Rev Vcore, although v 1.8 and test it so more, if this is your first overclock take several days to reach a good configuration.

That most if not OC and Overclocked or..... I have a 2200 + before and had put a 2600 + and it worked perfect I see in internet forums and also stopped running at a 2500mhz a real 3000 + and I think I was watching Vcore windows and have had stable 1.65 put 1.7 in the bios.

If you say that man is to see to believe, because everything is commenting on ''real'' but you have a comment bred and t depend only on the process of stepping on Everest in a occasions has said that a limit 2.8 GHz, but that's just a guess of the soft.

Now man does not matter if you upload the multi plate since most can not, what other, even if you have a 2600 + is that it has a little more than a 100 MHz 2200 (in fact the difference is small) if the board does not take the oc can not do more, the other less serious testing for more multi FSB, 200x11 = 2200 real and also note if the memos are not stand.