Thread: Sempron 2800 overclocking

This process is easier and more 2600 but we re a few that we have that speed Vcore of 1.5 but does not even have any desire could get about 1.65

Now your memories.... you could try leaving them in 266 and play with the latencies for achieves more or less leaves them tight but well-run.

You can have a very high clock speed but here to win the processor performance is the fsb that matter more FSB performance while more win ^ ^ this process has a locked multiplier x8 so what you can not move, but to get to 325 fsb to reach the 2600

Greetings

I left in 2200 MHz fsb 275 the HTT-3

The memories down to 166 MHz (ddr 330) and jumped up to 220 MHz with 2.5-3-3-7 latencies temperature is 30 degrees (the same that was without overclocking)

I have also updated the bios and the only thing that changes is that previously could only configure reports in 333 and 400 and now you can download at 200

Do you can put a pin mod guide for this process?