Thread: Sempron 2800+ overclocking

I already have one on my plate 2800 is part of oc and multipliers has a part to raise ht 1000 but I saw this good is say nothing at all could be 2000mhz easy but in 2800 I did a single with in the bios.

Computer:
Operating System Microsoft Windows XP Professional
Operating System Service Pack Service Pack 2
Internet Explorer 6.0.2900.2180 (IE 6.0 SP2)
DirectX 4.09.00.0904 (DirectX 9.0c)
System Name GONXALO
Domain name GONXALO

Motherboard:
Type AMD Sempron, 2000 MHz (8 x 250) 3400 +
Name of the motherboard EP-8NPA7I (3 PCI, 2 PCI-E x1, 1 PCI-E x16, 2 DDR DIMM, Audio, LAN)
The motherboard chipset NVIDIA nForce4-4X, AMD Hammer
System Memory 512 MB (PC3200 DDR SDRAM)
BIOS Type Award
Communications port Communications Port (COM1)
Communication port Printer Port (LPT1)

Monitor:
Graphics Card NVIDIA GeForce 6600 GT (128 MB)
3D Accelerator NVIDIA GeForce 6600 GT PCI-E
Monitor Plug and Play Monitor(26712)


Storage:
NVIDIA nForce4 ADMA Controller IDE Controller
NVIDIA nForce4 ADMA Controller IDE Controller
IDE Controller NVIDIA nForce4 Parallel ATA Controller
Storage Controller SCSI / RAID Host Controller
Hard Drive ST3120022A (120 GB, 7200 RPM, Ultra-ATA/100)
Scanner Optical HL-DT-ST CD-RW GCE-8525B (52x/32x/52x CD-RW)

DMI:
Distributor DMI BIOS Phoenix Technologies, LTD
DMI BIOS Version 6.00 PG
DMI System Manufacturer
DMI Name System
DMI System Version
DMI System Serial Number
Name DMI Motherboard nForce4 DDR: 8NPA7I / 8NPAI Series
DMI Motherboard Version 1.x
Serial Number DMI Motherboard
DMI Chassis Manufacturer
DMI Chassis Version
DMI Chassis Serial Number
DMI Chassis ID
DMI Chassis Type Desktop Case

Thanks in advance.

Hello friend

I know the same processor, my question is if you left the memories = o will change those things in the bios I think latency is called?

Hi there are several guides that you could reviser to get inside a little on the subject, if you raise the fsb but you should lower the ht to 3x, use another splitter in the reports to revise the Vcore, but I think the cpu-z shows it wrong.

Might try ht 3x, fsb 300, memory 133, depending on your process you can with stock Vcore.

Greetings.

What you told me rose to 300 fps leave the HT to 3x ram to 133 and the Vcore goes by 1.4vy 1.5v

CPU Properties:
Type AMD Sempron
CPU Alias Palermo (Venice-256)
Scaling of the CPU DH-E6
(CPUID) Name of the AMD Sempron ™ Processor 2800 +
(CPUID) 00020FC2h Review

CPU Speed:
Processor clock speed 2400.3 MHz
CPU Multiplier 8.0x
CPU FSB 300.0 MHz (original: 200 MHz, overclock: 50%)
Memory Bus 200.0 MHz
DRAM: FSB Ratio CPU/12

CPU Cache:
L1 Code Cache 64 KB (Parity)
L1 Data Cache 64 KB (ECC)
256 KB L2 Cache (On-Die, ECC, Full-Speed)

Properties of the motherboard:
Identification of the motherboard 10/03/2005-NF-CK804-6A61FPADC-00
Name of the motherboard EP-8NPA7I (3 PCI, 2 PCI-E x1, 1 PCI-E x16, 2 DDR DIMM, Audio, LAN)

Chipset Properties:
The motherboard chipset NVIDIA nForce4-4X, AMD Hammer
Memory timings 3-3-3-7 (CL-RCD-RP-RAS)
Command Rate (CR) 2T

SPD Memory Modules:

BIOS Properties:
Date of system BIOS 10/03/05
BIOS Date 09/02/05 Video
Award BIOS Message 10/03/2005 For nForce4 Chipset
DMI BIOS Version 6.00 PG

Properties of the graphics processor:
Graphics Card XFX GeForce 6600 GT PCI-E
Code number NV43GT (PCI Express x16 10DE / 0140, Rev A2)
Clock Speed 501 MHz (original: 500 MHz)
Memory Clock 501 MHz (original: 500 MHz)

Now you have to keep trying, with my 2566 MHz I have come to believe that 320 fsb at 1.45v, but with one ram (512mb).

Tries to leave the memory in 1t and see if you can squeeze a little latency, otherwise it would try if you can let the memories with the divider 150.