Thread: Overclocking P4 3.0 GHz

Hello everybody ... I went no more in the forum, and I did something tb bay that I wanted to do, but not as much hilt, and looking at the issues that are, as I do ...

About a month ago to change the fan bringing my processor, and changed the CPU Cooler Pure ... Lower the temperature of 55 pc it was "normal" (long bone) at 39 º C and 42 º C (and that's when it's hot in winter ... I guess ...)... Then, as contained above, I started to read the issues, and I put hand to the work .... And come to this ...

References PC
Pentium 4 3.0E Prescott Socket 478
MB Asus P4P800
Corsair Memory PC3200 (400Mhz) 2x256Mb
MSI FX5500 128Mb Video T..
Cabinet Daemon C / F 450W

So then ... I look forward suggestions and opinions ... I would like to see how to make the jar more ... I know that you can ... To see if you can give me a hand ... and hope that the information that I help and motivate all of this ... With all that is learned ...

As a probe rapid jar after OC Photoshop CS2, which took 9 sec ... studying graphic design when I was testing me hate ...

Could you explain how you have done?

I have a Prescott 2.8GHz and I want to take advantage of low temperatures to learn about the OC, I have already touched the ceiling with my 9200SE and the next step is the micro, but I have no idea So since you have the same architecture could use me that no a followed the steps ...

My plate is similar to yours, So that's why there's no problem.

This oc your good to begin with but little with ventilation Stock, and memos value mobo (like herbs) you take a Prescott 3.6 to 3.8, 4 or more.

My memories are Kingston 2x256MB.

Then start raising the FSB from the BIOS?

What tensions do not touch at any time?

Varying latencies of memos? Anything else?

Thank you.