Thread: AMD Athlon XP 1700+ overclock

I have an old jar on a t-bred 1700 +, no oc. As this old, I wanted to get a little more power, but the motherboard, an ECS k7s5a not allow any modification or FSB, Vcore and thus flash bios, so now I delivers frequencies to change the procedure and reports: 100.9/100.9, 107/107, 110/110, 112/112, 124/124, 133.9/133.9, 100/133, 133/100, 133/166, 143/143 , 147/147, 150/150. Defaults are at 133/133 and now I recognize a 1800 +. As my idea is to leave it in a 2200 +, I was thinking about the method of the wires

Then the query is: to leave it as a 2200 + (1800 MHz about) what would you recommend setting about fsb, multiplier and Vcore? The more you can get? There is a danger to the motherboard if the fsb goes up above the 133 (maximum design)? The Vcore is showing the 1584 bios without option.

I have achieved a volcano 7 +, and the memories are some Kingston ddr PC2700 (256 +512 MB).

If you're reading this oc a layer of interest that is degraded.

If all you have to have is very good and caring heart.

There is a desert as oc interactive processes with the technique of the wire tries to find that I look for and also the first left which they found the link here so that others may also oc.

Medium Hard to say how much leave the process depends on many factors, including the stepping process, whether or not heat sink paste, if there is good ventilation inside the jar, if the source supply voltage even if the plaque is stable, if the moon is full or new, etc, etc…


As a starting point of the process indicates the steeping like to know the voltage produced.

As a comparison of

AMD Athlon XP 1700 +
AXDA1700DLT3C 4162157250121
JIUHB0314MBM

Stock 1.5vcore multi bus133 x 11 = 1463 MHz
1.65 Vcore Overclock to bus 200 Multi 11 = 2200 MHz

All this in a NF7-M (= IGP integrated video) and fan TT TR2-M3.