Thread: AMD Venice 3200+ overclocking

Hey goat, I tell them that I am being Overclocked my PC ... I do it first time with a 64 ... I lost my virginity 64 bits!

CPU AMD Athlon64 3200 + Venice Core (Default 200x10)
Cooler Box (It has to be changed!)
ASUS A8N SLI PREMIUM
1 GB Ram ... I need to order here, I have Kingston 2x256 and 2x256 OCZ Value:
MSI 6800 256/256

At this moment I am stable at 300x8 (2400 MHz) and insurance that gives you a little more, but for the good do not upload more (had to put 1.475 Vcore). The system goes to 35 º and 41 º C Full (damn inefficient cooler box).

My question is ... is the memory you will not find anywhere an option to the BIOS to the divider between the CPU and MEM. Ideally I would a 3:2 divider, it gives a little more than my natural freq MEMS (which are 3200)... but I can not find where to do it!

First of all, if the cooler box was bad not come with your A64 .. second search in your bios say where or Dram Frequency Dram settings and there should lower the frequency of your reports to be asynchronous; now have a very low multi these fsb with that winning performance increase FSB but almost nothing in the clock frequency of your processor, my recommendation would be to leave it at x9 HTT x3 FSB frequency at 300 and 266 so you want performance and get the juice to your process.

Greetings

I have 2750 MHz to 1.525vy full load in the summer

I was like 48 degrees and this gives me full-time load as find this Care when the temperature reaches 50.

Sorry for not reviewing the post, thanks for the comments!

I did not know if the temperature as well, because it is similar to what was on my Barton 2500 + @ 3200 + and thought they were the lowest in 64.

Ascend the multi to see if you bag the remaining MHz ...

Respect to the memos, I do not know if I will be blind, stupid or both, but I can not find the option.

I'm using the Asus bios Award 1011-006 ...

Thank you!

The other spoke of Venice by flies because if this goes super clear cold idle mine goes to 32 degrees in the winter but now a full A FULL but I say that because you say that the process goes to 100% does not mean that such a beating at the maximum is not the same music that clearly says encoder 100 CPU to do a test of whether stability and OCT or something like that will not last lets do nothing in the pc with heavier test.

I have a 3000 + Venice and I could not get over 2400, even with 3-4-4-9 latencies ... and 1.65 for Vcore ... I have bad CAEU by the process or should I say it is satisfied with frequency ... for the moment I got in 2200 ... accepting suggestions.