Thread: Overclocking Athlon XP 1800+

I have done enough time my pc in this way and is very stable so far.

Not that they seem to you, this is the first OC I do and no idea if it could be improved.

Procedure: Athlon XP 1800 + which runs on 1.5v default.
Mobo: DFI NFII Ultra Infinity
Memos: 2x256 Kingston PC3200 Single Channel
Cooling: Volcano 7 + artic silvers 5 and a good flow of air into the case.

Currently I have it running at 2100 and 1575 GHz with 200x10.5 of Vcore.

Any suggestions opininion and is more than welcome...

What is the reason why you do not use the dual channel?

configuration latencies are in default to cambial 2.5-3-3-5

Doing these two things do not really see miracles but certainly better performance as to the procedure oc could rise a little speed and leave the Vcore to around 1.6 but less. For my taste and this cooler than 52 degrees is fine.

The reports were 3-3-3-8 in default of 2.6, now I have pinched latencies to 2.5-3-3-7 and rose to 2.7.

On the dual channel was not active when playing UT2004 as I was a little game wave hit the game very little, but it was steady.