Overclocking Barton 2600 +

Fabian Nadal · 06-10-2009, 11:51 AM

I have the following problem:

My Barton 2600 + (locked) was stubborn half to reach 200 MHz fsb. With less than 1.8 Vcore falls when required, so it's 1.85 (1.81 real seconds speed fan). (2300 actual MHz) so I'm half worried voltage. I have read here that it is 1.75 sufficient to reach 200 MHz fsb.

I can be my source (generic 350W). Memories leave you with 2.7 vDIMM flies, latencies have for the SPD. I first want to find balance with the CPU and then the stress memos.

Thank views, greetings!

Baker Roods · 06-10-2009, 11:52 AM

This source may on the Vcore is relative, stability test and monitor the temperatures in all cases to stabilize a Barton 2200 MHz not have to put more than 1.75v.

George kertzen · 06-10-2009, 11:53 AM

About your oc, the truth is rather that to be a Barton normal, and do not prepuces by the voltage applied to it in your processes, but note that the walk.

If this under the 55-60 º do not have that worry.

Another thing, if your source watt, these highs and lows of the Vcore is the same, the source can not be with so much voltage.

Cecil Dumny · 06-10-2009, 11:55 AM

Barton blocked one to reach 2300 MHz is a good number ... I do not see because they say both "stepping evil" and things like that (in this case) because the performance is not bad otherwise is to OC in sports, whether it was for those with bad overclock.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Barton 1900+ processor	Felix Clark	Processors	3	06-09-2009 10:13 AM
Sempron 2600 + overclocking	Alexavier Nash	Overclocking	4	06-03-2009 01:36 PM
Ati 2600 xt	Johnny Mullagh	Graphic & Displays	5	05-12-2009 10:26 AM
Ati Radeon Hd 2600	techno23	Motherboards & Memory	0	02-14-2008 10:03 AM
ATI Radeon 2600 Pro	techno23	Storage	0	01-18-2008 01:32 PM