Thread: How can I overclock my processor?

I began to experiment, of course I read a guide that explains a lot about what it means Overclocked, the thing is, follow this guide to start my oc.

First try Overclocked my processor (the signature) and I ah the straw to remove the heat sink to record the stepping to see if anyone tells me.

ADA3200DAA4BW
LBBWE 0531EPCW.

Continuous time, enter the bios (this followed a guide that is on the part of overclock), I put in the LDT x3, PCIe 100 to 100 was good, so let the voltage to 1.4 MHz and 133 memories, then save and go to windows.

Open the clocked for nForce4 and CPUz and went up the HTT to 200mhz from 10 to 10, 210, 220, etc, and taxes provided the prime95 and I did not error as I did run over 1 hour until I was so unstable as to not remember something like 2460 and reboot, I raised the voltage to 1.5 and wait a bit here but it rose by little more something like 2512 and reboot again with the reports that did not do so better leave everything in default for not sending any Condor.

The other thing to try is my Overclocked VGA (the signature) and install RivaTuner to overclock was little and went up to witnesses who told me that this was not the highest, reaching Freq. core clock: 590mhz and Freq. Memory Clock: 1.15 MHz is too little?

Generally reach the real core 2400 MHz begins to ask more Vcore, so it's correct what you did. So it is prudent to take 1.6. The Venice was not very hot, so if you have <40 ° ideal.

As for the memos to find out what CPU-Z latency defaults of your memos, manuals and place them in the bios these timings. The OCZ 2.5-4-4-8 value I think they are, but confirm it. In any case the value given to about 240 vDIMM of 2.8, so I think the memos to 166 you will be like if he does not bring up the 260 fsb.

T. Video amiss, oc is a pretty good, so comfortable with that.

Tuned the timings of the memos and perhaps most scope.

Thank you. And they tell me that this is?

ADA3200DAA4BW
LBBWE 0531EPCW
Search parties stepping but is not.

Oh I saw the neither reports about a neither formula that is not understood nor WEBA.

Morning to see if I bring some of the catches CPUz showing the info of the memos.

Some things are not as well: "I put him in LDT x3", and because the memory down to 133 MHz? By default in a car and gave 200 MHz.

No attempt by oc bios? By clocked is not a bad option, but not because all that apply directly to the bios? is simpler and can achieve results that majors with a program to ocear!

OCZ value of working with 2.5-2-2-5 latencies of 266 to 200 with a frequency of 2700 c, so it can be tightened more than what you have without any problems, and if you become unstable, rising vDIMM the hair and a ready.

Luck with your oc and greetings.