Thread: Overclocking my PC help

Well last night we gave it the overclockers to my pc with the help of my friend, trying some things,

I gave 290 htt
multiplier 9
LDT 3
memos 133


I also have a suspicion, you may not have anything to do the subject, but a month ago about using a guide to find here in oc make it to the fan connectors pa cabinet work and not to 5v 12v, you could be doing that any conflict with the line 12.

Waiting for any advice or questions, thanks!

I think the LDT, you should be in 5 ... 5 * 133 = 665 (less than in the 1000 MHz Hyper Transport) ... Because if you can not remember more "LDT": mm:

These work with a ratio of 1.5 ... VR of the memos would be approx 187 MHz ... If you are PC3200, 200 are certified.

Try to raise the vDIMM 2.9 ... and the CPU ... a: mm: 1.7 V "real" good Care of ventilation! That ... yep, I leave at your own risk!!!... Regarding the voltages andtemperatures!!!!!

If the source says 10.8v clearly should not have a change of more than 0.15-0.2V for you to maintain a stable oc.

Now the problem may go through your process, known that's lower than 2500 MHz, with 290 * 9 and going into 2610 MHz.

I think its Hyper Transport is rather LDT x HTT x LDT speed memories. If you have a 290 * 3 = 870 <1000.

For me, it's the source. You have 3 optical drives, 1 HDD and fans are a lot.

The process to 1.7 volts, it seems a lot.