Thread: Overclocking E6600 P5B Deluxe

I want to know what settings I should apply in the BIOS to 2.93 or 3000 MHz, and preferring to touch people and not to do stupid and will be forced to pass through the CMOS. I do not know the history of time and I don’t understand how to make the memory to 333 MHz (1.1 ratio because my lifted automatically when I go to the FSB and the frequency above 950 MHz I took the example that I found on the net but I I wish that I explain Manip mainly on memories. If you are having any info then reply me. It can helpful to me. Thanks in advanced.

You must put your FSB 333 to 266 333 to your memory will also be synchronized. Just when you go to the memory speed to make more or less (+ or) using the keyboard to change the ratio of memory in connection with the FSB ... Thus, in 6400 with the RAM you can add 333 FSB and run RAMS much higher. But you can always check by putting them 1:1, which will give you 667 MHz Therefore, for your memory, and this is 800.
Thus, in summary, if you use the ratio of FSB / RAM 1:1 and you put your FSB RAM 333 to 667 would be cadence MHz and therefore will be under the clock compared to the nominal speed.