Results 1 to 8 of 8

Thread: Overclocking AMD Phenom 2 X4

  1. #1
    Kevin Paschal is offline Senior Member
    Join Date
    May 2011
    Posts
    284
    Rep Power
    3

    Default Overclocking AMD Phenom 2 X4

    I have it overclocked used the bios. By changing it to Details and Using it by 10%. It is a fixed brand and I had tried the AMD Super speed. Which hair up my program and reboots it everytime I am seeking to obtain it to 2.8. So That is my objective to obtain it at least overclocked to 2.8. It was 2.4. I observed amazing regarding ACC, other than have no concept where to begin. Need some help here.

  2. #2
    Barnard Naldo is offline Senior Member
    Join Date
    May 2011
    Posts
    292
    Rep Power
    3

    Default

    One of the most significant elements most of them require to be acquainted with is what your primary conditions are operating under fill. Set up HWMonitor and have placed it start on the pc at the identical time as you run Prime95 combination for 15 moments. Then publish a pic of the HWMonitor program. HWMonitor identify to screen not merely CPU temporary, which is basically calculated not beginning from the CPU itself other than from the mother board plug place. Extra than moreover primary conditions, which are the crucial ones. It might be that to assist in you are reaching a primary temporary walls.

  3. #3
    Harold Paul is offline Senior Member
    Join Date
    May 2011
    Posts
    279
    Rep Power
    3

    Default

    It gives the impact of being just like your ram incident at 884 mhz might be too great as well. It is merely ranked at DDR2 800. You might do well to begin it at DDR 666 as an substitute of DDR2 800 in bios as when you overclock through the fsb the ram rates of speed up too. Place your CPU-z tabs: CPU, Storage and SPD when you publish next. I identify to obtain that information in series to you when I obtain off perform today. My pc seems to be utilizing excellent at 2.650. Just want it quicker.

  4. #4
    Paschal Baldwin is offline Senior Member
    Join Date
    May 2011
    Posts
    313
    Rep Power
    3

    Default

    When you do not have made a dark-colored version CPU i.e., one through an revealed multiplier you have placed to implement the fsb to overclock. It's the expert bus of the program and several additional element wavelengths tie into it. I might not be amazed if you requirements a Vcore push and I might try LinX. LinX is outstanding for not allowing elements slide by. You might obtain 2.9 if you improving the air conditioning.

  5. #5
    Obert Alban is offline Senior Member
    Join Date
    Jun 2011
    Posts
    237
    Rep Power
    2

    Default

    Linux I recognize to under no circumstances apply Just do not like it. What be predicted to I position the storage space down too starting from 884 and what do I used to do that in the bios. In bios there be predicted to be an adjustment for the starting amount of the ram. It might be indicated as a multiplier or just currently actual wavelengths just like 400, 533, 666, 800. You might have placed to take something off of "Auto" to see the solutions.

  6. #6
    Harold Daire is offline Senior Member
    Join Date
    Jun 2011
    Posts
    294
    Rep Power
    2

    Default

    Your performance is having difficulties starting from aspect to aspect the combination of ram you are using because it creates your bios to run in personal path as opposed to mixed path. You might be much excellent off through an even wide range of similar storage space continues to be moreover 2 or 4 continues to be to let mixed path operate. The Combined path storage space is purchased in a kit where the continues to be are equalled at the maker.

  7. #7
    Harold Obert is offline Senior Member
    Join Date
    Jun 2011
    Posts
    295
    Rep Power
    2

    Default

    Your main momentary max is 61 C in HWMonitor. If not anything else is protecting you starting from overclocking higher, that to support in great momentary is. The AMD CPUs are protected up to around 70 C additional than when overclocked they start to become dangerous when main circumstances start to go beyond mid 50s C. The long and the little of it is you perceptibly need a excellent CPU frosty to achievements further. So proceed and position your storage space returning on 400 for plenty of moment as it gives you a little excellent performance than 333.

  8. #8
    Gentian pedro is offline Senior Member
    Join Date
    Jun 2011
    Posts
    302
    Rep Power
    2

    Default

    I had started out through the mom panel and the cpu exclusive of be familiar with much past p4 company. Which I have placed and found a lot in viewpoint of the factor that then. I had used an old power smooth, fans and scenario. Lately purchased the movie card for something simple and hd. I had used an 2 old complicated drives I had relaxing around. Bought the 2gb of storage space and was prearranged the 3 512mb. I was planning on getting a contemporary power system ranking at-least 600 h, and if I had acquire a contemporary ac system would that probably help.

Similar Threads

  1. AMD Phenom 2X4 940 Subzero Overclocking Try
    By Emil Justa in forum Overclocking
    Replies: 0
    Last Post: 03-06-2012, 09:55 AM
  2. Replies: 4
    Last Post: 12-30-2011, 12:17 PM
  3. Overclocking of AMD Phenom XIV 9850
    By Gene Philip in forum Overclocking
    Replies: 5
    Last Post: 11-16-2011, 09:55 AM
  4. Overclocking Phenom II X4 940?
    By Bartolomeo Carmela in forum Overclocking
    Replies: 1
    Last Post: 09-09-2009, 11:25 AM
  5. Overclocking Phenom X3
    By Cael Anglian in forum Overclocking
    Replies: 5
    Last Post: 04-28-2009, 07:31 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
SEO by SubmitEdge

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48