Thread: Cooler Master UCP 900W Power supply

Cooler Master UCP 900W in which its own way. The painting and the buckles on the sides give the PSU a nostalgic feel and a cast iron-like look. Even the grille and the hex screws holding the fan is attached, will help. Whether the look, like it or not, that's a matter of taste, but one can not deny that it is reminiscent of old times, when the quality even more important than the quantity or appearance had left. Times of mass production that is certainly a deliberate move by Cooler Master to choose the so-Optics. The power supply has a solid and stable living room like an old coal-fired oven.

When wiring and equipment with connections have to tell you that they UCP 900W more than sufficient is on. Thanks to the very long cable network feels the part, even in a full tower or server case well, but even more there, because the wiring harness needed in the form of rolled up some space. Here we have simple enough choice. which leave no wishes unfulfilled. The power supply has, for example, four PCI Express connectors for SLI and CrossFire. Two of them, six poles, the other two six-or eight poles. You may have four 6-pin, two 6-pin and two 8-pole or two pole 6 +8 graphics cards such as GeForce GTX 280 and power connector to join words. Here are the 8 pin connector and wired correctly, so with 8 cores and not, as often with 6 wires and a "2 pole mounting.



In the number of SATA ports Cooler Master has not been stingy and the power supply equal to nine SATA ports missed, resulting in a hard drives and optical drives can operate in wide range. Anyone have the older 4-pin HDD connectors required, the blank is not well. The power supply has at least five of these connectors, so that so that old hard drives and optical drives can be operated. Also, the UCP 900W has a modular ATX / EPS power connector, whereby the power supply 20 pin ATX motherboard can be operated with even older. The 12 volts for the CPU (s) give it two modular 8-pin plug, the two 4-pin connectors is made.