Too many to hide unused cables in the case and no space for the unused cable, as a modular power supply can provide a remedy, however, modular power supplies are not cheap. Cost many a modular power supply it's not always be the case, shows us his Rasurbo RAPM 550, which costs no more in addition to the 550 watt version, there is also a 650 watt version.
The processing seems solid and stable, the painting of the power supply is mostly in a dull olive green held, the floor was painted matte black, both Lackierung are resistant to fingerprints. The power supply is kept quiet simple, no big sticker on the sides or logos on the fan grill, no, keep it simple Rasurbo limited here to a small sticker on one side, this can be seen only if you include the power supply to the fan down.
At the front are in addition to the fixed cables for the motherboard (24 Pin) and the CPU power supply (4 +4 Pin) 6 sockets that can each be equipped as needed with the included cables. Here are 4 black sockets for 4 pin Molex and
SATA power supply is available, as well as two red slots for graphics cards, the connections make a robust and should withstand an often-changing system.
The outlet for the permanently installed cable has a good edge protection, the edge protection, and the sleeve to protect the cable from sharp edges and abrasion also, the sleeve bears a beseren airflow in the case, because there is less turbulence. The sleeve is not opaque, so the colored veins are still visible, two discreet sticker to show the user what Steckpläte which are intended for cable.
The power supply of the main shelf is ensured by a 20 +4 pin connector weight, by separating the pins k, can also operate older motherboards with only 20 pins similarly, the CPU power supply, a 4 +4 pin combination allows you to connect to older motherboard types, if the video card, there are 6 +2 pin connectors.
The power loss is still very serious size, because they are vital for the energy is, except one from the waste heat , current cost and has a louder PC nothing, the energy absorbed by the power supply, so you have to pay eventually, this of course also on the environment because the energy is only provided once. In plain language this means that the product is the thermal energy dissipation in the device and this must of course be paid back thus, the efficiency is still too much be taken seriously and an important quality characteristic.