Reply With QuoteSo I knew what Nich adapter NEN, NEN trial but would it even worth it certainly underestimated.
Member
New power supply is now nothing more Hello Friends, once you have helped mri scan fine with my first nt problem-says here 2 yesterday's all I arrived I put it together just want to (have to get the 24 pin connector SLIGHTLY on the 20 pin socket would turn the whole thing does not work anymore. have again the 20 pin connector from my old Nts and the 4 pin connector the CPU and connected it to work.
Member
So I knew what Nich adapter NEN, NEN trial but would it even worth it certainly underestimated.
Member
May well be that the cable is not plugged in properly is a little tight because have joined so far only these two plugs are somehow in the power supply cable which is partly in NER of other color bad?
Member
Just as on the Enermax site to see is the 24-pole ATX connector is not separable, put on a 20-pin connector such terminals to me was new, so I am assuming that the plug does not fully inserted, thus you come without an adapter does not continue.
Member
Have now NEN 24 to 20 pin adapter, unfortunately, does not stupid have established degree, that I and the 4 pin connector on the 2nd I encouraging plug connected to the same may have still got a 8 pin stekcer both have yellow and black wires and belong to those who are on fixed Nt want to be knows, something that the nt of the 8 pin connector?
Member
Can you please take pictures of the plugs that you do not have free and that you have plugged into the board, the 8-pin connector called P8 connector, belongs to the Board's - if it's the one I mean, if you do not have cam, we will try together to identify the connector to use the Enermax site. Plug up to that time nothing better around more, the 20-pin connector would have much easier and more particularly 1-2 mm have been plugged into the socket with the adapter, right?
Posting Permissions
Copyright Techfuels
Bookmarks