Thread: Konica Minolta Magicolor 1650EN-D Printer Test

The color laser printer offers a USBport with an Ethernet interface. He also brings printer emulation PCL 6 and PostScript 3 with the. Both printer languages installed in parallel on the test computer. This is convenient, because it can simply change the emulation when needed. Drawback: film can be described as pressure medium in the driver of the Konica Minolta Magicolor 1650EN-D is not set. Nevertheless, he printed films, how the test was - but only with a very strong impression roller. Therefore, we recommend foil print with the Konica Minolta Magicolor 1650EN-D on the.

Inside the color laser printer sits a multi-pass printing plant, which processes the four printing colors in a row. This process is at the expense of speed. At the same time differed depending on the selected printer language. The better values of the color laser printer reached at PCL: This required the Konica Minolta Magicolor 1650EN-D for the twelve-page PDF document with 2:39 minutes still quite a lot of time. But even 1:14 minutes for 20 pages in text mode are not very fast. In double-sided printing, the figure increased even 2:44 minutes.



In principle, was the black cover of the color laser printer heavily. Nevertheless letters remain legible. It also changed the toner light splashes in the PCL mode, nothing. The high opacity was the same at the expense of details - which struck particularly in fine lines. The color of the Konica Minolta Magicolor 1650EN-D was consistent. Even difficult areas such as silver tones, he was again realistic. However, the printer had trouble with color areas. Here we presented partially solid light strip.

From the factory provides the Konica Minolta Magicolor 1650EN-D low-filled toner cartridges from. For this purpose it was penalized. But based on cartridges with a long range since the prices of color laser printer are steep: we calculated for the black and white sheet 3.9 cents for color page, we even came to 14.1 cents. Even when the power was the Konica Minolta Magicolor 1650EN-D is not economical: even in sleep mode, it still drew 11.2 watts - not much. Therefore, the color laser printer completely separated from the network when we operated the switch.