HP Photosmart Wireless All-in-One is a printer that is not only limited to be used over the wireless network, but uses the connection to the Internet through a technology called ePrint. With the portal, can be managed remotely from any workstation with a browser. For each printer registered on the portal ePrint Center HP is assigned an e-mail that can be used to print a wide range of documents such as Word, PowerPoint, Excel, PDF and all major image file. Through the portal, then you can access a collection of applications to install on this machine to print without using the PC: all you need is a wireless access point and Internet connection for your printer.

HP Photosmart Wireless All-in-One is quite compact and lightweight (450 x 420 x 200 mm). Its user interface is based on a color LCD screen, 6.1 cm located on the left of the front buttons surrounded by "touch." Lower down, always on the left side of the front, are positioned slots for flash cards, and that the power switch to turn on the Wi-Fi b / g / n. The printer integrates all the software needed to print photos directly from the card with the ability to select, optimize, adjust color and exposure and select the different print sizes.

Name:  HP Photosmart Wireless All-in-One  Printer.jpg
Views: 127
Size:  22.3 KB

The scanner has a resolution up to 1200 dpi with 48-bit color depth. The printing mechanism is based on 4 individual ink cartridges and provides the ability to mount those 364XL series that contains more ink for improved performance. The black type pigments, which is only used when printing text to provide a higher return. In photo printing, black is reproduced by mixing yellow, cyan and magenta.

Configure the HP Photosmart Wireless All-in-One takes a few minutes, just time to install the drivers and bundled software on your PC and connecting to the wireless network. The calibration of the heads is semiautomatic, because the printer does not have sensors and you need to print a particular diagram which should then be placed on the scanner to enable scanning and subsequent adjustment of the heads. They are also absent from the sensors that automatically identify the type of paper and be careful not to forget to select the right media at the time of printing.