Thread: AMD athlon 5200 +

I just put a c, this process is a series black a780gm v1.1 I have never overclocked, but only for enabled test in the bios and went up to 25 buses I think it is. The process increased from 2.7 to 3.1, where I leave? or upload more?

It raised curiosity because my old p4 always operated as a 50-60 º and amd CPU shows a sensor 2 which is always at 8 and another at 16.

Hi

To see that go well with the temperatures and is stable.

Greetings.

Hello

Look a little reading on the subject of reports to overclock; it will be the first thing that will annoy you. With these temp, you would not want to a little.

Hello

I recommend, if you did not even download the CPU and speed fan and then we can throw a screen of speed fan and CPU (the latter with the image of CPU and memory)

Giving these temperatures are illogical.... Get into the bios to check what the temperature.

The black edition, I can climb up the multi ... upload one by one until fall ... then go over 0.15 volts and still giving the multi XD.

Ht link down to 4x in 1170 because he got more or you can be unsettled the pc.
Rose after the reports splitter and walk up the fsb of 1 to 1 without changing the voltage so you know the limit.

Much voltage you put!

I have a 5000 + EE and I have it in stock Vcore with 13 * 235 = 3055 MHz so first find out how to get MHz Vcore with stock!

You remove the overclock and the first two times the top windows are black ... it was a protection of the plate or something?.... no longer happens. I explained to protection due to sudden change of frequency 3.2 to 2.7...