Thread: E6550 processor

I have C2D E6550 CPU of 2.33GHz and 4MB L2 P35 dr3r reaches 450 FSB and a multiplier of 7x is 3.15 GHz also gave the reports can not be left "Unlinked" Then I have the divider.... that a friend has an E4400 2mb L2 which has 10x multiplier and 315 fsb draws 3.15ghz with memos and the same I walk more relaxed shit, then I realized you can get much more juice changed my CPU to a C2D e4500 at the store is just my second day with the CPU.

Hello

Should be much the FSB to 450 for those reports that is why you wadding reports, I recommend a little lower.

Hi

Is a patriot extreme performance 2 GB 800 MHz 4-4-4-12, we have the same 2.

So the question will be better with a more pro multiplier rather than more cache?

Hi

Look at your plate does not know, but it seems very strange that a board that lets you uploads the fsb to 450, do not let the set of reports.

Good but independent of the plate or memos will be best for OC?

A process with more leverage instead of cache?

I do not care about I have a cooler temperature well.

More is always better that more fsb multiplier for increasing the efficiency of each cycle if you have a cpu and a cpu to 200x10 to 333x6 surely, and without fear of error, the second will yield significantly better than the first. The cache, there is only rather advanced load, or heavy multitask, think up something like two years of the cpu with 1mb in l2 were a luxury, today it is not, but I think 2mb cache, are more than adequate for almost all applications that use.

No comparable with a E6550 to a change of e4500, you have to do is relax latencies with these easy to get to 1000 patriot @ 15-5-5-5-2T@2.2V with that love for them on to bus 500 (now you have to see if your mobo supports 500 or if your process does not entail a very low fsb wall but I doubt it because most to2 the G0 bring high walls, mobo more volts to the chipset and most cane to process, but definitely there is no constraint oc the memos, the best is 1:1 (500 MHz fsb cpu = 2000 troops, 500 MHz memory = 1000 individuals).

That was cached, the memos they relax and get to 3.01ghz with a fsb of 430.

As the memos in tight 4.4.4.12 reach a fsb of 450 but unstable ultra ...

Thanks!

Greetings!

Raises the voltage of the VTT FSB if you have at hand, often helps when you work with very high FSB to maintain stability.

1.45v is a voltage suitable for the VTT.

Greetings.