Thread: Pentium MMX processor

Hello friends

I want to increase speed and performance of my Pentium MMX 200 to experiment.

Help will be appreciated.

Thanks in advance.

Check your settings for this motherboard. You are a 66 x 3 = 200MHz

You probably can, through jumper, raise the FSB from 66 to 75, so keep 225mhz. Or raise the multiplier of 3 to 3.5, leaving some tremendous 231mhz. If you go to able to get to 66 x 4 = 265mhz so. With this machine you fly, able to put you like to Windows Vista.

See Overclocked speed is reached super noticeable!

Before CAEU Overclocked to play Pac-Man, after raise your speed by 15%, you can get to play Doom3 or 4.

I feel guilty for wanting to silence and my clock Pentium III...

Do what they tell you to raise the FSB jumper (Check the manual for your motherboard)

Perhaps there will be at NFS3.

Welcome to this huge community. Entering the item to increase the speed of your processor (Overclocked), you must configure the FSB of your processor as the multiplier the same, this is configured by jumper 2 runs on your motherboard, which leaves the graph same plate, these are to set the FSB (processor frequency) and the multiplier, example 66X4.