Thread: temperatures bad new 965 x4

Asgard because I just my new processor and what is my surprise that I idle around 38-40 degrees mark when my x3 720 with the same sink that I now marked on idle about 28 graduates this normal? I can do?

I see normal note that the TDP of 965BE is 125Wcompared to 95W of X3 720.

Equally if not satisfied, try to apply the thermal paste somehow different etc.

See if the cooler is well anchored cambial new thermal paste and try to lower the voltage.

I mine, with the team of my signature I have it now at idle to 27 degrees with an ambient temperature of 19 degrees as a thermometer of the room. I have it at 1.356 v.

my box is a silver stone tj 09 by the cooling both cash I have nothing to deciliter 1.325 with stock voltage and I just try now with the mulch to 18, or 3.6 ghz and I have spent the OCCT an hour and I passed full of 55-60 degrees as far as you see it? room temperature here in my room about 18 grandiose be cool and quiet is on automatic, I do not know if I cambiarlo.

note that you have a core producing more heat more often besides CPU Salome

also might not like you should have put the thermal paste or the heat sink.

I have not looked at is the processor brings some sort of plastic protector stuck like glue or something.

Because if I comment that you have a good case, you have an OCZ Vendetta 2 cooler and temperature 18 º ambient temperatures in idle that I said before, if I see them higher.

I see them a little high, but mainly because it has reached in full. Now if you come in winter to 60 degrees in summer you could go up more and enter the danger zone for the processor. Personally ride again

Mon tastes Miracles when the Heat sink to remove the plastic that comes? then yes, you often come a plasticity to the heat sink base.Desmond and make sure, look anchors do not have good pressure and Honduras, the thermal paste, put a very thin layer covering all the surface of the CPU or put a drop in the center of the CPU, is try to have which is best possible ways.