Thread: Storage across time glitch happens in MSI K9A2 Platinum V2.

Hey Friends, I have a MSI K9A2 Platinum v2 with an AMD Sempron 3400+ in it. It has Buccaneer XMS2 CM2X1024-6400 2x1GB with Q-Tec 400W.Now when I over clock the FSB and run the HT up to 900MHz the memory run up to 405 MHz exclusive and it is not synchronous with the FSB. The Bios presentation shows DDR 2 frequence is 900 MHz but the newest versions similar AMD Apply and few others equivalent Windows utilities displayed 810 exclusive. So a remembering over timepiece bug occurs.

The HT Link has no linking with memory frequency. According to me with the AMD Sempron 3400+ and with the 225 CPU HTT x 9 MP having around 400 module finger it exhibit 405Mhz Retention ratio .So it you have a close wait at it then effectively it is around 810MHZ.So for me there is not often of an bare with you and I don't conceive there is a field trouble with your main board. Thanks Friends,

I think that you require to alter the PSU Q-Tec 400W.The Q-Tec 400W is not that high. The trouble with them is that they can't give the land what the current systems need. Also their 550W type is not that near as the simplex 300-350W. For me you should go with some alter quality sullies same the Enermax or Antec TruePower. They are real power supplies and will provide you with good results. There are also a some more present but these are best.

Even I concur that there must be few trouble with the Q-Tec 400W.According to me they sell it similar a chinchy Enermax but they are not still juxtaposed to it. They don't alter develop adpressed to that one and do neglect in most systems. When they have the lottery it comes out to around 579W but the actual rate is 550W.The brim power is never utilised to assess a PSU but the maximum power is, and only most 3/4th of it utilized. So according to me you require to look at the Q-Tec 400W. Thanks Friends,

Thank you for your result that you have provided. I has a seem at you set and I feel that I require to seem at the PSU. I haven't started to product on it yet but I will raise my to around 600-650W.With the K9A2 Platinum the grouping ran with nominal power configuration mode and not only the CPU but also the Drachma oftenness automatically ran raise slower.