Thread: Repairing BIOS after virus problem

I included Ram in my PC but it was not displaying in BIOS. So I made many changes in BIOS but my system is not working correctly. Thus how would I get default settings of BIOS after virus problem to work system properly?

1) You can do simple modifications to BIOS that helps to raise processor speed. Push chosen key during power-on-self test to enter in BIOS. If PC does not show this then you have choice as splash screen i.e. system builder, check manual for this. By these methods you able to repair BIOS after virus problem.

2) Simply push F6, all must be ok or choose load fail safe defaults.

3) After you enter in BIOS many simple changes can be run to optimize BIOS. Initially Auto-Detect IDE drives utility used to remove all IDE hard disks, go in BIOS and remove all not working IDE channels do not concern if CD-ROM or any other device is connected to it because PC has other way to detect those hardware other than these settings.

4) Once those simple twists are done, enter in BIOS and modify following entries. Ease the Quick Power-on self-test setting at start up and turbo frequency setting to increase clock speed. This can be dangerous if system is already overclocked.