Thread: Ineffective to utilize 4GB RAM on 8N Neo4 Series MS-7125.

Well I am having 8N Neo4 Program MS-7125 motherboard on the machine of mine. I have installed Windows 7 x64 on the computer of mine. Apiece of the DIMM slot is supporting for the peak situation of the 1GB of RAM. I am unable to pose 4 GB RAM why because it is progressive the density is heard up to the 3GB.

Well sensing at the situation which you make provided over here I am unable to exploit out the number effort of the troubles. I necessary to pair total element configuration regarding the machine of yours. also assert me which version of the BIOS do you make installed on the motherboard of yours.

I imagine I am having a particular resolution which you can deal and I am hoping that it faculty aid you out to fix the difficulty of yours. vessel I recommend that you should know CAS interval to the BIOS to 3 in say to grapple with the description of the module. In soul it is not working in any conduct then you should set the similar to the Auto.

Wellspring in this status I am suggesting that you should exchange the CAS interval to 5 with the tRFC of 127. I am also suspecting that the air which you are confronting is totally related with the VRM which is placed on the RAM or the CPU Mem Controller would be the set cause of the trouble.

Well I want to know what amount of voltage you are applying to the DDR1 RAM? According to me you can go for 2.8 volts if the BIOS of the scheme allows you for the identical. You should also try with descending the memory frequency to the worst practical values for the faculty timing as the service allows you to do the similar.

I recommend that you require to run the RAM by using the 2.65volts. also you can ply few redundant emf if it is required. Fit I am also suspecting that you have reached the circumscribe of the memory controller. If that is the position then I let you cognize that you can do anything unless to get the new RAM for the computer of yours.