Thread: Issue relating to SATA hard drive and the system does not Boot up

I purchased a new SATA hard disk and installed it to increase my storage capacity and connected all the data as well as power connector and switch on my computer and system machine got started but PC didn’t boot up all the power light where blinking but the power which should bling in green color it was red color as I have already two drives installed in the system an I added these extra hard drive and these problem occurred I am using an old Pentium 4 processor computer and 2 GB of RAM will u please help me out?

I would like to advice that firstly check all the power connectors of the hard drive as well as any other devices and check again if your system boots up and if there the same problems change the boot option whether it may be a hard drive without any operating
System installed in it. And change it to your main hard disk and save the changes by pressing the F10 key.
If the system still fails to boot up then you have to install a new operating system or else the power supplied would not be sufficient to the hard drive so you need to change the power supply with 600 watts of power or check the hard drive light is blinking or there are any vibration it means the hard drive are working well.