Thread: Working on my computer

Hello, need help.

I was working with my computer the other day and no more boots. Power on, turn the monitor, turn the keyboard, do as you read the hard drive and monitor the LED starts flashing. What happened?

Now I'm connected with a flaming P100 for the past decade.

Thanks.

Hi

Tried changing the video card ... or the process died!

Hello

The board is composed; you just put a video card and nothing, the same symptoms. How to know if the board or the processor is dead?

Have disconnected everything, food and IDE cables from the motherboard ... leaves just the processor, video and memories turn to the machine... If you still can not remove the part and coming back to the pc if the process died…

Unplug everything and only tested it with video, memory and processing.... Nothing, relocate the memory, nothing at all. Remove the processor and not even a miserable beep.

Was apparently the plate.... Can it really be safe?

What you want and what you can afford to sacrifice their own personal.

The motherboard could be it ... but it becomes difficult to generate by discarding some of the old components?

Tries to do with someone having a configuration like yours (but to prove the memos on another machine and other components!

The plate may have fallen in action. The PC was re-shit old and good (and I had a story as they had my jar ... I ran the last ix when it should not even supposed to go).

Maybe there is a loose wire around. Generally, when the cable of the floppy is bad or the ram is released, these plates start beeps like crazy, so to look at all the details.

Look, something more useful to know if the process or the board.... Includes the jar, and the cooler while processor is running, if not heated at all, the process... when heated, the plate .... Might try to reset the bios (or moving the jumper from the battery, or simply battery and replace ...)

Hello people....

Miracle with the computer, but never both. After you have disarmed and thrown out the corners to the 2 weeks I have re-arming......

Despite some little problem even saves. The problem now is that it turns off

Not everything could be so wonderful is not it?

Sometimes it takes hours to run, but others try to read a cd on and off, or leave for a while using the computer and back, with the first key press turns off…

Come on; give me ideas.

Hi

I think it was the RAM, this usually happens with these boards, do not show video and do not start. That good that you could recover.