If Windows can not complete the work properly, in most cases this is due either to the system power management, or working with the wrong drivers. There may be other reasons. Here are considered the most common methods for solving related problems.

Problems power management

Options power management settings in Windows XP, using Power Options section (electrical supply) panel. For example, if the Power Options dialog box (electrical supply), you see the tab ARM, then Windows interacts with the correct mechanisms ARM (Advanced Power Management) of your motherboard. Click on the ARM (AUP) and check Advanced Power Management Support (Ciclismo automatic power management).

If the tab is not available, please check your computer's BIOS configuration-make sure that in your BIOS supports ARM (Advanced Power Management), or ACPI (Advanced Configuration and Power Interface). In addition, make sure that the system has the correct level HAL (Hardware Abstraction Layer), the accuracy of your computer.

Then check the registry settings associated with the electrical supply:

1. Open the Registry Editor RegEdit.
2. Expand the branch HKEY_CURENT_USER \ Software \ Microsoft \ Windows \ CurentVersion \ Explorer
3. Double-click on the importance CleanShutdown. By default, this option is set to "0", but if at the end of the system have problems (the system reboots or freezes, rather than complete its work), you can change its value to "1".
4. Click "OK" and expand branch HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurentVersion \ WinLogon.
5. Double-clicking on the parameter PowerdownAfterShutdown. Give it a value of "1" if you want after the conclusion of the Windows computer otklyuchalos food. If you assign the parameter value of "0" - food will not be switched off.
6. Click OK and close the Registry Editor. To make changes to take effect, you need to restart the computer.

On some computers, this problem can be solved as follows:

1. Open Divice Manager (Device Manager). This can be done with the file devmgmt.msc
2. In the View menu (View), select Show Hidden Divices (Show hidden devices).
3. Interestingly, there is the list of named APM / NT Legacy Node (Node Interface NT APM / Legacy) under System divices (System device). If such a record exists, and it is displayed on top of the red cross, right click on it and select Enable (Ciclismo). If such a record does not exist, then the decision may not apply to you.
4. After you have configured, close Divice Manager (Device Manager).

Scenario completion of the work

Perhaps your system is the conclusion of the scenario. He can cause problems in the completion of the system.

1. Open the Group Policy Editor (gpedit.msc)
2. Expand the branch Computer Configuration (PC configuration) => Windows Settings (Windows configuration) => Scripts, Startup / Shutdown (Scenarios run / completion).
3. Double-click the recording Shutdown (Shutdown) on the right side of the window to open a dialog box properties conclusion of the Windows. If, in the list have any records, they remember or write down on a piece of paper that, if necessary, you can restore them. Then delete all records.
4. Click OK and close the Group Policy Editor window.

Problems virtual memory

The system can be configured to automatically delete the file virtual memory (swap file) at the time of completion of the work. On some computers, it can lead to problems. To disable automatic removal swap file, do the following:

1. Open the Group Policy Editor (gpedit.msc)
2. Expand the branch Computer Configuration (PC configuration) => Windows Settings (Windows configuration) => Security Settings (Options safety).
3. Double-click the recording Shutdown: Clear virtual memory page (Completion of work: cleaning virtual memory page file) and select Disabled (off).
4. Click OK and close the Group Policy Editor window.

Here are a few fairly common causes:

1. Sometimes the reason for the Windows could not complete the work, is antivirus software.
2. Sometimes the cause of the problems can be sboynoe annex.
3. Make sure that the system installed the latest updates.
4. If your computer is at least one network card, try to move it in another slot.
5. Perhaps the problem is the power supply.
6. If Windows allows you to stop the USB controller in order to reduce energy consumption, this could cause problems in the process of completion.