Thread: Windows XP Ethernet controllers

Again install Windows XP Ethernet controllers?

If you have any in solution please let me know that

Give me some proper solution for that

What steps will be needed to do this

If you are having any suggestions then reply me. It can helpful to me.

Thanks in advance for any ideas

Open your PC case by laying it on its side, separate the power and unscrewing the access door from the case. The door is linked with several Phillips screws on the back of the case. Unscrew the Ethernet card from PC and lift it out. Put the card back in, rather in one more open slot if you have one.

Screw the card back in. Close the case and resume the PC. Windows must find the card and ask for the drivers. Place in the drivers CD and browse to the right folder and select the Ethernet drivers. Permit Windows to finish installing and starting and the controller must be reinstalled. If the controller is not working, go to the Device Manager, under System in the Control Panel, choose and delete the Ethernet Controller and try again.