If there is a problem with the wireless network, and what steps to take to help eliminate the problem. Suit.

If you do not have a list of access points to show, when you want to scan a wireless device is not set to a limited range of channels.

If sueopneun to connect the access point to determine whether the setting is consistent with a single access point to the train station. This is a voluntary system of security and authentication protocols. The best way to simplify the configuration. If you are using a program such as installing security protocols, access points to open the wpa for authentication and WEP security, and traffic to see if it does not get passed suit.

Science degree from the suit. Diagnose any security, the access point is configured to use the ping (8), as a mere tool.

Many debugging support wpa_supplicant composition; manually running any request - dd option to look at the system log.

In addition, many lower - level debugging tool. Debug messages for the program to keep using the 802.11 protocol. Suit was found wlandebug / usr/src/tools/tools/net80211. For example:

Wlandebug - I + + + + debugging ath0 certification committee scan Net.wlan.0.debug: 0 "=> 0xc80000 <assoc,auth,scan> To enable the console to use, access points and relevant messages to be scanned due to the need to configure 802.11 handshake protocol.

Maintaining this many useful statistics floor 802.11; wlanstats tools, such reclamation. These statistics are all the errors found by the hierarchy to identify 802.11. However, some of the errors found on the floor below the 802.11 warily driver to lie, and to look at the suit. Specific questions diagnostic device drivers must refer to the document.