Thread: Creating a network printer wireless

Wireless Print Servers

Get and install a wireless print server (WPS). This is a device regarding the size of a flick-apex mobile that permits your local PCs to "see" your printer above a wireless network. To start setting it up, attach its AC power adapter and connect a USB cable among it and the printer. If the suitable cable is not in the WPS's packaging, get a cable with a square-shaped "B" end and a standard flat "A" end. Next, plug an Ethernet cable into the WPS's port, and attach the other end to an accessible Ethernet port on your wireless or wired network router.

Your WPS approaches with installation software. The installation process differs by model and brand. Go behind the instructions in the documentation for installation. When you are over with setting up the software and drivers, separate the WPS, go back the printer to its original position, and plug the WPS into a wall opening close to the printer. Re-connect the USB cable, and after some seconds your wireless printing will be prepared.